5 Problems water tanks that should be urgently

Nowadays, most people choose to install a water storage tank inside their home. To help reserve tap water for use when the water suddenly does not flow. And helps filter dirt or sediment that comes in the water. This allows us to get clean water to use in our daily lives, such as washing dishes, washing clothes, cleaning the floor, etc. without worry.

Even so, a water tank is still a convenient device like any other device in your home. Of course, when used for a long time, it may cause many problems with the water tank that may become damaged as well. To help you deal with it in a timely manner, today we have brought you the most popular problems that often occur with water storage tanks. Including how to fix it for everyone.

5 popular problems with water tanks

1. Water overflows in the tank.

The problem of water overflowing the tank is another big problem. Because if you leave it for a long time It may cause the tank to swell and the tank to break. This may occur after installation or when used for a long time, usually due to 2 main reasons:

1.1 The float has a problem : The float in the water tank opens and closes the water valve instead of using human force. When the water is full to the specified level The float automatically blocks water from flowing into the water tank. But when the water goes down, the float will open and allow water to enter the tank. Therefore, if the float is damaged or deteriorated may not be able to control turning the water on and off As a result, the water overflows the tank.

How to fix a float problem

• Close the water valve to prevent tap water from flowing into the tank.
• Remove the old float assembly by turning the float out first. Followed by removing the stem and turning off the threaded coupling of the float.
• Install the new float set by starting with wrapping tape around the threaded joints to prevent water leakage and connecting them to the water pipes.
• Connect the stem of the float to the float and rotate it to fit the threaded joint.

1.2 Installing the water tank in the wrong way : The problem of water overflowing from the tank may occur after installation that it is installed in the wrong way, such as connecting the water pipe to the wrong hole. There is no installation of a check valve that is a device to help control the direction of water flow in the same direction. The only way to fix this problem is to call a professional technician to inspect and fix it. Because there are quite complicated repair methods.

2. Leaking water tank

Leaky water storage tanks often occur from choosing a water storage tank that is not up to standard, including the base beneath which the water storage tank is placed is not strong. Because the tank installation should be built with a base made of concrete to support the weight of the water tank well. To prevent collapsing if placed directly on a ground surface. It may also result in being hit by a rock or the water tank falling violently against the ground, risking the tank cracking. Leads to water leaking out. It also makes it easier for dirt to enter the water tank.

How to fix a leaking water tank

• If anyone has mechanic skills, they may be able to repair water tanks easily with a method of patching the tank that starts with preparing the equipment, that is. Plastic welding gun and PVC plastic line or plastic wire
• Place plastic wire on our water tank and use a plastic welding gun to melt the wire to cover the cracks in the water tank.
• While the plastic wire melts, you can use a metal spoon or knife to spread the melted plastic around to close any holes or cracks as completely as possible and smooth it out.

The above solutions for water tank leaks are suitable for water tanks that are made of plastic and have minor cracks, cracks, and holes. If you don't have enough expertise, you can call a repairman to quickly fix it. But for large holes Including the water tank made from stainless steel, it may be necessary to replace the water tank and build a strong base for the water tank.

3. Dirt stains

Dirt in a water tank refers to water sediment stains and algae stains, which are another problem that many people encounter when using it for a long time or installing it in an inappropriate area, such as an area that is exposed to sunlight all day. Especially water tanks made from non-opaque polymers, so you should check your water tank regularly. Or have you noticed that there is a bad smell or algae stains coming out while using the water? to proceed with solving the problem.

How to fix  Dirt stains

• You can fix this by cleaning it to get rid of the stains. By closing the water valve and opening the cork located at the bottom of the tank. to release water remaining in the tank
• When the water has completely flowed out Some sediment may remain at the bottom of the tank. You should use a hose or high-pressure water sprayer to remove all sediment or algae.
• Take the water tank cork and clean it and wrap it with plumbing tape about 2-3 turns before closing the stopper completely back in its original place.
• Open the water valve to flow into the water tank as before. The water tank should be cleaned at least every 6 months.

4. Unpleasant smell

While you are using water to wash dishes, do laundry, or do various activities, you feel that the water has a bad smell to your nose. You can consider that the water inside the tank has something abnormal. This is usually caused by not closing the lid of the water tank completely, causing dust, germs, and insects to get inside the tank. Or it may be caused by choosing a water storage tank that is not made from substandard materials. Including the accumulation of algae stains caused by excessive sunlight penetrating into the tank and not cleaning it.

How to solve the problem of unwanted odors in water tanks

• In the case where the water tank cover does not close completely and has algae Let you clean the water tank. To drain old water and eliminate odors by using general cleaning solutions such as dishwashing liquid. or a solution that does not have strong acidity And use a long brush to clean and remove stains and odors in the tank. Before rinsing with clean water and opening the water valve to enter the tank as before.
• In the event that the water tank has holes or cracks, you can patch the water tank and clean the water tank or possibly replace the water tank with a new one.

5. Pale colored water tank

The reason your water tank may appear paler than the first time you installed it may be because you placed it in an area that receives sunlight most of the day. causing the water tank to become discolored. It may also cause other problems, such as moss, cracks, and the water tank shrinking causing leakage problems. Is it unbelievable that just the sunlight from the sun can cause this much problem to your water storage tank.

How to solve the problem of pale water storage tanks

• Check the water tank for signs of damage or not. To expedite repairs by patching the water tank or it may be necessary to replace the water tank with a new one.
• Move the water tank and install a new water tank and plumbing system in an area that doesn't get a lot of sunlight. To prevent the color of the water tank from fading and reduce the deterioration of the water tank.

Shop for water storage products online 24 hours a day with Thai Watsadu.

Experience shopping for home products online today with Thai Watsadu, the home product center for Thai people. Selling water tanks, easy to order, convenient and fast, and you can choose to pick up the products at the branch yourself. or choose to receive the product at home Nationwide delivery service Order online at thaiwatsadu.com or contact via Chat & Shop LINE@thaiwatsadu Tel. 1308