Air conditioner Installation Steps That Even A Beginner Technician Can Do!

When you have decided to install an air conditioner in your home. You should not overlook the method of installing the air conditioner. Because this is as important as the method of purchasing an air conditioner. Most often, many people tend to give this duty to air conditioning technicians. Even though we are not the ones who installed it ourselves or do not have knowledge on this point. But knowing the steps or methods for installing an air conditioner At least it will give us confidence in using it and knowing how to deal with it when the air conditioner breaks down. Including talking with the technician and getting a clear understanding.

How to install the air conditioner

Choose the location to install the air conditioner: Before installing the air conditioner, you should survey the installation area to be sure whether the area is suitable or not for installation. Because once installed, dismantling or moving it is quite difficult. There are mainly 2 areas for installation: the area inside the house for installing the cooling coil or the air conditioner. And the area outside the house is for installing the hot coil or what we call a compressor.
- Cooling coil: Located in an area that is easy to install and clean. Does not obstruct the usable space within the house.
- Hot coil: There must be no obstruction in the entrance or exit of the air. Good ventilation. Easy to route electrical wiring and drainpipes. There is space around the machine not less than specified.

Air conditioner installation steps: There are many types of air conditioners. We will give an example of installing a wall-mounted air conditioner that is commonly used.
- The technician will place anchors in the wall and then secure the plates with threaded screws tightly. Because this steel mounting plate will support the weight of the entire air conditioner, use a Hole Saw to drill holes in the wall. Diameter approximately 6 centimeters, for inserting the air conditioner refrigerant pipe. and allow the sewer pipe to pass through.
- Connect electrical wires and wrap air conditioning pipes together. Then connect the wires between the cooling coil and the hot coil. It is recommended to study the installation manual. Because each model is different.
- Attached to the air pipe cover rail and air conditioner refrigerant pipes for internal and external work After that, hang the evaporator coil onto the plate. or steel plate to be fixed neatly That's all, the installation of the evaporator coil is finished.

Piping: Air conditioner refrigerant pipes made from copper. Be careful not to let dust clog the pipe. Because it will cause damage in the future.
Install the hot coil hanging stand: Install the hot coil hanging stand or compressor to place the compressor unit
Welding: Weld copper pipes and flares.

When the installation is complete, the air conditioner technician will test for leaks and create a vacuum with the Vacuum Pump tool for approximately 20-30 minutes. Then the air conditioner technician will start collecting work in various parts, such as distributing electricity to turn on the air conditioner, measuring pressure. R-22 air conditioner refrigerant, checking the normality of the air conditioner, etc. This is only an example of installation. In the actual installation, there may be adjustments made as appropriate.

Shopping for products Air conditioners online 24 hours with Thai Watsadu

Experience shopping for home products online today with Thai Watsadu, a center for Thai home products, selling air conditioners. Answer every need. Easy to order, convenient and fast. Choose to pick up products at the branch yourself. or choose to receive the product at home Nationwide delivery service Order online at thaiwatsadu.com Or contact via Chat & Shop LINE @thaiwatsadu Tel. 1308