Tiles Adhesive JORAKAY Grator Size 20 kg Grey

• Cement glue for ceramic and granite tiles.
• Consisting of cement, Persland, Sand and other special materials, making the product quality that provides high adhesion
• Granito tiles, standard sizes Inside the building.
• Ceramic tiles of all sizes, floors and walls inside the building.
• Convenient, no need to soak the tiles in the water before crab.
• 1 cement glue is available. Quantity 5 sq.m. (all sizes of tiles)
• Size 20 kg
• Gray

Method Use

Surface preparation

• New surface
  • The desired surface must be hard, dry and clean. Dust -free, oil, concrete liquid, colored, cement, foreign objects and normal water absorption.
  • If the surface of the new plaster wall or a new adjust Should take a standard of 7 days or 168 hours per 1 cm thickness.
• Original surface
  • Clean the surface using water injecting. Scrub the surface thoroughly To remove dust stains, concrete, colored, cement, and other foreign objects and sweep all the water that is locked on the surface before using cement glue

The mixture ratio

• 20 kg cement grease (1 bag) per 5 liter
• 25 kg of cement gauge (1 bag) per water 6.25 liters or
• Cement Gerry 3 Part 1 section by the water volume

Mixing

• Adhesives, cement adhesives into water, using a low amount of 150 rounds. Minutes (150 RPM) help to mix together. Do not add more water or cement glue after leaving until the chemistry is incubated. Into the floor or wall that needs to be tiled thoroughly And enough for the tiles to be used for each time. By holding the comb to the angle of around 60 degrees and scraping into a way in the same direction as the short side of the tile (Use a trowel to suit the tile size)
• Use a smooth comb to cut the cement glue behind the tiles. To compensate Or twist the tiles And ensure that the glue is full behind the tiles Prevent the occurrence of air cavities, allowing the crab tiles to fully hold the pressure. Not broken later.
• Bring the tiles on the cement glue. Slide the tiles to the way in the direction perpendicular to the genre of the scrape. Knock the tiles firmly with the full cement glue throughout the sheet. Beyond that time When pressing the tiles onto the cement glue Should be sure that the back of the tiles can touch the cement glue fully throughout the sheet The thickness of the cement glue that is cut on the surface should be between 2 - 10 mm.

And tiles.

• After the tiling is finished Should be left for 24-48 hours depending on the temperature and then the tiles To get the highest quality work Should choose the crocodile glue that is suitable for the characteristics of the groove and the characteristics of the location.

Additional suggestions

• To get the most efficiency The tiles should be after tiles at least 48 hours.
• To increase the efficiency of adhesion. Should use crocodile cement glue The back of the tiles all over the sheet.

Limit of use.

• Should not be used on asphalt flooring, plastic coated walls or metal PVC. And glass (do not be cold in 72 hours)
• If you want to cover the surface of the material other than specified, please contact the company.

Caution

• Products may cause skin irritation. Should use safety protective equipment such as gloves, masks, glasses, etc.
• In the case of the eyes, clearing the eyes with clean water many times immediately and quickly consult a doctor.
• If correct Or touch the face to use water and cleaning soap.
• Should keep the children's hands.
• Do not eat

Storage

• Should be stored in a dry umbrella without moisture. And there is a ventilation The temperature is not too high. Because the product may deteriorate.
• 1 year old product from the date of production in the condition has not opened the bag.

Note: Color Of the product shown on the website may be different from the color display settings of each screen.