Decking Fiber Cement Paint SHERA Decking Paint DF-1404 (G) Size 1 Gallon Golden Sand Teak

• Dyed wood dyes for fiber cement especially.
• Real acrylic color 100%
• Easy to put on, deep color, not peeling, not fading for 15 years.
• High quality film, excellent infiltration into fiber cement
• Resistant to UV light to a brighter color than the oil formula up to 3 times.
• Good prevention of water.
• Prevent mold. Lemongrass
• Easy to use, dry, fast, without a pungent odor.
• Suitable for Cherra and fiber cement
• For woodworking work. The stairs can be used both outside and inside the building.
• Size 1 gallon
• Golden Tattoo (DF-404 (G))

Technical information

• Type: Pouring color
• Shadow level: Shadow
• Tools: Light brush
• Mixed mixture: mixed with water 10 - 15%
• Application area: 40 - 50 sq.m./Gallon/travel
• Dry period
  • Experience 30 minutes
  • Dry can be applied 1-2 hours.
  • Dry can be used 4 - 6 hours

How to use

Step 1 Surface preparation

• New fiber cement: clean The surface is free from dust. The dirt and leave to dry completely.
• Old fiber cement : scrub the old color, stains, dirt out. And leave to dry completely. Fill the screw head and seam with SHERA FIX. Then scrub with sandpaper.

Step 2 Color to combine before applying. Color to the bottom of the tank During the application, people should color every 5 - 10 minutes to prevent the color to sleep.

Step 3 Painting foundation

• Painting foundation shera Primer, clear color, 1 trip and should apply on all 6 sides, including drilling marks, cut with a dry brush 1 - 2 hours

Step 4 Painting on top

• Painted on 2-3 trips until getting the desired intensity Each trip is dry for 1 - 2 hours.

Step 5 Painting marks

• Painted coating around SHERA TOP GUARD 1 - 2 trips to Increase special protection Including scratches, drying 8 - 12 hours before normal use.
• Protective coating should not be exposed to water or wipe within 24 hours after applying.

Additional suggestions

• Should only use a soft brush (Do not use rollers) so as not to cause spots.
• Should be applied along the length of the wood to the end of the wood one by one. Should not be applied at a time Because it will cause brush marks. May cause brush marks.

Note : The color of the product shown on the website There may be different from the color display settings of each screen